Trunnion mounted ball valves, floating ball valves, pipeline ball valves, underground ball valves, full welded ball valves
E-mail: info@byhovalve.comHow to choose worm gear for ball valves
|
NPS |
2” |
2.5” |
3” |
4” |
5” |
6” |
8” |
10” | |||||||
|
seat |
soft |
metal |
soft |
metal |
soft |
metal |
soft |
metal |
soft |
metal |
soft |
metal |
soft |
metal |
soft |
|
CL150 |
H |
H |
H |
H |
H |
H |
H |
H |
H |
H |
H |
H |
H |
W |
H |
|
CL300 |
H |
H |
H |
H |
H |
H |
H |
H |
H |
H |
H |
W |
H |
W |
W |
|
CL600 |
H |
H |
H |
H |
H |
H |
H |
H |
H |
W |
H |
W |
W |
W |
W |
|
CL900 |
H |
H |
H |
H |
H |
H |
H |
W |
W |
W |
W |
W |
W |
W |
W |
|
CL1500 |
H |
H |
H |
H |
H |
W |
W |
W |
W |
W |
W |
W |
W |
W |
W |
|
CL2500 |
H |
H |
H |
H |
W |
W |
W |
W |
W |
W |
W |
W |
W |
W |
W |
Then,How to choose worm gear for ball valves?
NOTE: “H” means HANDLE “W” means WORM GEAR
Information on Worm Gears:
A worm gear is a type of gear that is used when a higher torque is needed. Worm gears are different from others. This mechanism is made of two parts. The first is the gear and the second is the worm. The worm turns the gear but the gear is not able to turn the worm. Worm gears are mostly used for conveyor systems and on high performance vehicles.
There are three gears that can be used with the worm gear. The first one is the non-throated worm gear. This type of gear does not have grooves on in. The second type id the single-throated worm gear. On this type, the worm wheel has a throat. The third is the double-throated worm gear. On this type, both of the mechanisms have throats. Of the three, the third type is the one that can hold a large amount of weight.
The helical gears of the worm can either be right hand or left hand. On the right hand helical gear, the teeth or the jagged edges are turned in a clockwise direction. On the left hand helical gear its teeth rotate counter-clockwise.
The worm gear’s ratio can be decided based on the number of the gear cycle’s teeth and the threads. The ratio of the worm gear is higher when the number of threads used is less. Worm gears can come in single threads, double threads, triple threads and quadruple threads.
Worm gears are used in different machines. The most common uses of worm gears are for rolling mills, conveyor engineering and also for automotive parts. These worm gears are used as speed reducers. In turn, the torque is increased. In most cases, electric motors have a very high speed and a low torque level. The worm gear works the opposite and this makes it ideal to use for different applications.
One factor that affects the performance of a worm gear is the lubrication. As the gears turn, there is friction and this causes heat. When heat is present, the effectiveness of the worm gear goes down. You have to properly lubricate the worm gear in order for heat and friction to be decreased. When the heat and the friction are decreased, you can expect the worm gear to work better.
Materials for gears. The most common materials that are used for worm gears are bronze and steel. However, there can also be other materials used if they are suitable for the application. Other materials that can be used are nylon, aluminum, non-metallic materials and hardened steel.
EDITED BY ZHEJIANG BYHO VALVES CO., LTD
29th Mar. 2012
Copyright © 2026 Zhejiang Byho Valves Co., Ltd.. All rights reserved
0086-577-67980033